78M6610+PSU Data Sheet
4.2
SPI Interface
The 78M6610+PSU can be configured as SPI slave. Once the SPI interface is activated, it utilizes the
following pins:
SSB:
SCK:
SDO:
SDI:
Slave select (SS) is an input and active low signal.
Serial Data Clock (SCK) input.
Master Input/Slave Output (MISO), serial data output.
Master Output/Slave Input (MOSI), serial data input.
Clock Polarity and Phase
Figure 16 shows a single-byte transaction on the SPI bus. The data is shifted on the falling edge of the
serial data clock and latched on the rising edge.
SCK
SDI (Master Output)
SDO (Master Input)
MSB
MSB
6
6
5
5
4
4
3
3
2
2
1
1
LSB
LSB
SSB (To Slave)
Figure 16: Single-Byte Transaction on the SPI Bus
SPI Protocol
The SPI allows access to read and write registers contained in a 256 word (24-bit) area of the on-chip
RAM. The address of each register specified in Section 3 must be divided by 3 for SPI access. The first
byte that the master needs to transmit to the 78M6610+PSU (slave) is the control byte. The control byte
allows setting the number of words to be transferred and the most significant bits of the register address:
Bit 7
Bit 6 Bit 5
NBRACC[3:0]
Bit 4
Bit 3
ADDR7
Bit 2
ADDR6
Bit 1
0
Bit 0
1
ADDR7 and ADDR6 bits select bit 7 and 6 of the 8-bit register address to be accessed by the following
data transactions.
NBRACC[3:0] represents the number of words (3-bytes) accesses to be performed by subsequent
read/write transactions. The actual number of data addresses accessed per data transaction is NBRACC
+ 1. For single address access, the field is set at 0. NBRACC is reset to 0 when the operation (multiple
reads or writes) is completed. NBRACC must be set to a non-zero value prior to each multiple word
transaction.
46
Rev 1
相关PDF资料
78M6612-DB/OMU-USB KIT DEMO OUTLET MEASUREMENT OMU1
78M6612-EVM-1 BOARD EVAL 78M6612 AC-PMON
78M6613-EVM-1 EVAL BOARD 78M6613
78M6613-SP-1 EVAL KIT 78M6613-SP-1
78M6618-PDU1 BOARD EVAL 78M6618 PDU1
78M6631-EVM-1 EVAL BOARD 78M6631
78P2351R-DB BOARD DEMO FOR 78P2351R
79-WHITE-1"X60YD TAPE GLASS CLOTH 1"X 60YD WHT
相关代理商/技术参数
78M6610+PSUEVK1# 制造商:Maxim Integrated Products 功能描述:ENERGY MEASUREMENT PROCESSOR EV KIT FOR SINGLE-PHASE POWER-S - Boxed Product (Development Kits) 制造商:Maxim Integrated Products 功能描述:EVAL KIT 78M6610+PSU
78M6610LMU 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Energy Measurement Processor for Load Monitoring Units
78M6611-EVM 制造商:Maxim Integrated Products 功能描述:78M6611 EVAL BOARD - Boxed Product (Development Kits)
78M6611-IVT/F 功能描述:IC POWER MEASUREMENT AC 24-TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:*
78M6611-IVT/F/P 制造商:Maxim Integrated Products 功能描述:PROGRAMMED - LEAD FREE - Rail/Tube
78M6611-IVTR/F 功能描述:IC POWER MEASUREMENT AC 24-TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 能量测量 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:*
78M6611-IVTR/F/P 制造商:Maxim Integrated Products 功能描述:PROGRAMMED - LEAD FREE/TAPE & REEL - Tape and Reel
78M6612 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Single-Phase, Dual-Outlet Power and Energy Measurement IC